MYWOT

Child safety

N/A

Confidence

0%

Trustworthiness

N/A

Confidence

0%

MALICIOUS CONTENT INDICATORS

Availability or unavailability of the flaggable/dangerous content on this website has not been fully explored by us, so you should rely on the following indicators with caution.

Licheepizero.us most likely does not offer any malicious content.

  • Siteadvisor

    Safety status

    N/A

  • SAFEBROWSING

    Safety status

    Safe

  • Phishtank

    Safety status

    N/A

Secure connection support

HTTPS

Licheepizero.us provides SSL-encrypted connection.

ADULT CONTENT INDICATORS

Availability or unavailability of the flaggable/dangerous content on this website has not been fully explored by us, so you should rely on the following indicators with caution.

Licheepizero.us most likely does not offer any adult content.

Popular pages

  • Build Uboot for Lichee Pi Zero | Lichee Pi Zero

    Grav is an easy to use, yet powerful, open source flat-file CMS

  • Create Bootable SDcard for Lichee Pi Zero | Lichee Pi Zero

    First, you will partition your SDcard using your favorite partitioning tool: Create first partition as a fat16 partition, this can be a small partition as it will hold only Uboot and Kernel (/dev/sdb1...

  • Lichee Pi Zero Hardware Data | Lichee Pi Zero

    TF Card Slot for boot. Display Information Direct plug 40P 4.3/5/7 inch LCD（onboard backlight driver) plug 50P 7/9inch LCD via converter board Supported resolutions: 272x480, 480x800,1024x600 ...

  • Setup WiFi for Lichee Pi Zero | Lichee Pi Zero

    The TF WiFi card can be installed into the TF-card slot or stacked onto Lichee Pi Zero Install into the SDcard slot Install into the SDcard slot, if it occupies 'SDC0', then you can only boot from 'SP...

  • Build Kernel for Lichee Pi Zero | Lichee Pi Zero

    mv gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf /opt/ vim /etc/bash.bashrc arm-linux-gnueabihf-gcc -v ( git clone https://github.com/Lichee-Pi/linux.git (or you can download a tar.gz made at t...

  • Home | Lichee Pi Zero

    see image at top for location). Powered by MicroUSB or 5V pins. DO NOT REVERSE CONNECT 5V/GND PINS!!! 5. [Expand rootfs & add swap] After booting, in the terminal it will request you to input a userna...

Open neighbouring websites list